How to Choose a Sliding Wardrobe For Your Home

In this post we will give you the instructions to assemble your own built-in wardrobe in an easy and simple way. Wardrobes Birmingham Here we show you the materials necessary for construction and all the process you need to make it. Apart from very useful tips to assemble the closet effectively. Attentive, because you will now learn how you can make a

MATERIALS TO MAKE THE BUILT-IN WARDROBE

 

Wood, it can be beech or pine. 5 sheets of 4 cm thick for the walls and 2 sheets of 6 cm for the doors.

Merganser or saw jig, cut off her woods.

One meter to measure your wardrobe.

Nails and a hammer, the first ones should be a bit long as they will serve to hold the woods.

Glue glue, look at the best quality to be the most resistant, because it will serve as a support.

Sand, to sand the surfaces of the wood.

Special varnish for wood.

Paint, if applicable.

Professional heavy gauge stapler, you will use it to fix the wood to the surface of the part of the cabinets.You can buy your materials at any hardware store or specialized store.

The cabinets are fundamental elements of the house. It can be given countless uses: such as a pantry, storing clothes, storing suitcases and objects that we use infrequently

But the problem can arise when we have a reduced space and the standard measurements of the cabinets that exist in the market do not adjust to our needs, Home Offices Birmingham or we want specific measures to be able to put specific objects, or we want to take advantage of a certain gap measurements

Regarding its manufacture and depending on the space where we are going to mount it, we can use folding or sliding doors. In this case, we have chosen to make a custom built-in wardrobe with hinged doors.

As Builtin sliding door Wardrobe, they are not hard to come by, and they are not expensive at all. So you have no excuses, following this tutorial, to make your own custom built-in wardrobe

The first step to start the manufacturing and installation process of a custom built-in wardrobe is to be clear about where we are going to place it, from here, we will take the measurements to know what materials we need to buy.

Now it's time to buy the wood. We have bought boards in white laminated dm of 16 mm of 1.22 x 2.44 cm. In the same place that we bought the wood and for a little more money, they have cut it for us, veneered in pvc of the same color as the laminated one and opened the holes for the hinges. We have asked to cut only the width of the frame, the side and the center partition of the built-in wardrobe. The length (2.44 cm), we will cut it at home to adjust it to the hole. The reason is that the ceiling may not be completely level and we need to adjust the wood.

To make a built-in wardrobe we must start by manufacturing the structure. For this we will first manufacture the racks. Fitted wardrobes To get an idea, this wardrobe will have the following measurements:

The manufacture of the frame is based on cutting the board in dm, strips of 8 cm wide and the length will be cut at home to fit the gap. Next, we open the holes with a countersink for wood. Finally, we join the different parts with wood screws until the frame is formed

Once we have the frames manufactured, we begin to install them in the hole. We take them off the ground with a template cut to the desired size. We first place the frame that stamps against the wall. We fasten them with some studs or nails, then we open some holes, and with screw and studs we fasten it to the wall. Later, Bedroom fitters near me we fasten one frame to another using screws.

To mount the interior partition panel and the side panel of the cabinet, we will use brackets attached to the wall. We will place three or four of these squares distributed along the wall.